SOLVOXY (P3); SSPL/ZNP-RO-MB (P2)

Scope Areas of Application Technical Data Storage & Handling Directions for Use

Scope

A single pack primer is based on the single pack modified alkyd medium pigmented with moisture of Zinc Phosphate and Red Oxide. A mixture of Zinc Phosphate and Red Oxide out of total pigmentation, the minimum quantity of Zinc Phosphate is 10%.

Areas of Application

Protection of structural steel, equipments, conveyors, storage tanks, etc., from chemical and saline environment as in fertiliser units, refineries/petrochemical complexes, Hydro Electrical projects, Port/Off-shore installation, Atomic Energy establishments, chemical processing units, Heavy Electrical Engineering units, pulp and Rayan units.

Technical Data

Storage & Handling

Directions for Use

Surface Preparation

Blast clean Mild Steel substrate to minimum Sa 2 ½ of Swedish specification SIS 5900-1967 or near white metal of 1477-1971 (Part-1).

If blast cleaning is impracticable, remove loose rust/scale using power tools/hand tools to achieve surface cleaning of St-3/St - 2 grade to Swedish specification. Remove contaminants like grease and oil using aromatic solvents. Ensure that surface is clean and dry before priming.

Special Instructions

Primed surface should not be exposed to corrosive environments for a long time without application of finishing paints.

In case primer coat dries for more than 48 hours, sand papering or primer is essential before application of finishing paints to ensure good inter-coat adhesion.

Safety Information

Flash Point Below 20C Fire Hazard Class Flammable Safety Precaution Work in well ventilated place