|
| | | |
AC - Zinc (SSPL/IR - ACZ) Description | Single component, moisture cure urethane | | Zinc-rich primer/top coat | | Colour: Grey | | High solids, VOC compliant coating | | Uses | High performance zinc-rich primer or single protective coating in any use on steel where maximum resistance to rust or corrosion undercutting is required. | | Proven performance as primer in long life, high durability urethane systems for tanks, chemical and marine structures and bridges. | | Best possible zinc-rich coating for use in field applications where whether limits the use of other zinc coatings. | | Advantages | Single component. | | Can be applied in cold, damp conditions at humidity to 99%. | | Can be applied at low temperature to below freezing. | | Best corrosion resistance of all zinc primers when top coated. | | Out performs inorganic zinc three coat systems. | | Zinc stays in solution once stirred. | | Extremely easy to apply and easy to recoat. | | Very resistant to mud cracking. | | Recommended for immersion applications when top coated. | | Technical Data | Solids by volume: 62.0 ± 2.0% | | Weight per Ltr: 2.44 ± 0.36 Kg/Ltr. | | Pigment type: 83.0% zinc in dry film | | Flash point: Above 40°C | | Theoretical coverage: 7 sq.mtr/Ltr. at 75 microns | | Recommended dry film thickness: 60 – 75 microns DFT. | | Temperature resistance (Dry): 150°C Continuous. | | 175°C intermittent. | | Curing time @ 25°C; Touch-20 min; Handle-8 hrs; Recoat-4 hrs; stack-10 hrs. | | Recoatability: tack free (this is achieved normally in 4 hours) | | Colour: Grey | | Finish: Matt | | Shelf Life: 12 months | | |
|
|